3X MORE
MaxCell® Solutions fit 3 times
more cable inside conduit
3X MORE
MaxCell® Solutions fit 3 times
more cable inside conduit
MaxCell® Edge Solutions
Why choose it?
MaxCell Edge maximizes the fill ratio of conduits today and preserves infrastructure space for tomorrow. Unlike rigid innerduct, MaxCell Edge can increase cable density by 300% or more and installs twice as fast. It always pays to plan ahead—and MaxCell Edge is the fabric of the future for network construction.
Features and Benefits
- Its orange color makes for easy identification in your network
- Reduces material and labor costs by 50% or more
- Cuts carbon emissions by over 80%*
- Reduces or eliminates the number of conduits required in new construction
- Outperforms rigid innerduct in both cost-efficiency and sustainability
- Supports various cable sizes in conduit installations
- Enables overlay of cables in occupied conduits
- Reduces or eliminates the number of conduits required in new construction
- Patented fabric design reduces cable pulling tension by 85%**
- Melting point of 419°F (215°C) – almost twice that of HDPE
- Constructed of PET (Polyethylene Terephthalate) and Nylon 6
- Features:
- Pre-installed 1,250lb Vis™ Glide Rope in each cell for MaxCell Edge 1.25-in. – 2.00-in.
- Color coded, pre-installed 1,250lb pull tape in each cell for MaxCell Edge 3.00-in. 3-Cell, 3.00-in. 4-Cell, 4.00-in. 3-Cell
- Color-coded, pre-installed 1,800lb pull tape in each cell for MaxCell Edge 4.00-in. 4-Cell
- Pre-lubed for lower friction during Maxcell Edge and cable installation***
Design and fabrication of MaxCell products is patent protected.
* Data collected by Bent Branch Strategies
** Higher tensile strength pull tape and rope options are available for difficult cable installations.
*** Additional lubrication is recommended to further decrease friction during cable installation
Spec Sheet:
MaxCell® Edge Detectable
MaxCell Edge Detectable offers the same features as MaxCell Edge and makes it easy to locate cable with embedded sewn-in green 18AWG THHN solid copper wire that’s suitable for direct wired toning equipment and above ground handheld locators.
Why choose it?
MaxCell Edge Detectable is widely used in longer run greenfield applications or occupied conduit making it the best choice for all outside plant applications. Smart, detectable, and ready to maximize conduit capacity, choose MaxCell Edge Detectable.
Spec Sheet:
MaxCell® Edge Segmented Reel
MaxCell Edge Segmented Reel simplifies your installations and maximizes efficiency even more.
Why choose it?
Our MaxCell Edge Segmented Reel allows you to conveniently pull multiple packs of MaxCell Edge or MaxCell Edge Detectable at the same time. The reel includes 3 segments of 3-in. 3-Cell with two specific options. The size and configuration make it easier to install and it’s on the smaller reel trailers that contractors commonly use.
Features and Benefits
- Includes 3 segments of MaxCell Edge 3-in. 3-Cell or 2 segments of MaxCell Edge 3-in. 3-Cell and 1 segment of MaxCell Edge Detectable 3-in. 3-Cell
- Segments are differentiated by thread color: Blue, Red, and Yellow
- Two-reel length options are available – 3,000 ft. (9,000 ft. Total) and 6,000 ft. (18,000 ft. Total)
- Reel side cover: 4mm corrugated PVC
- Reel Tubing: 1-in. x 1-in. 14-gauge steel
- Reel Height: 72 in.
- Reel Width: 45 in.
Spec Sheet:
MaxCell® Data Center Edge
MaxCell Data Center Edge is our hyperscale solution, designed specifically for the demands of high-density, blunt, or pre-connectorized fiber cabling.
Why choose it?
MaxCell Data Center Edge has a large pocket to simplify the installation of a wide range of cable sizes. Our flexible fabric innerduct protects cable jacket integrity by preventing burn-through from cable over cable friction. This product offers the same features as MaxCell Edge but uses pre-installed 1,800 lb. (816 kg.) pull tape in each cell. Data Center Edge is ready to grow with your network infrastructure needs.
Spec Sheet:
Engineer Drawing:
